Maple & Paduak

end-grain-boards-work-in-progress-Michael's-Woodcraft

 

I started two end grain cutting boards last week, One was Maple and Cherry (left), the other was Maple and Pakauk (right). Paduak is an orange-red color wood from South America.

The Maple and Paduak boards is to the right, first glue-up. In this post I am going to show you the finishing process of the Maple and Padauk end grain board.

Michael's-Woodcraft-Maple-&-Paduak-chefs-end-grain-cutting--board

The above picture shows the second glue-up for the final pattern.  It’s dry  and ready to go to the Jet belt sander to get it flat on both sides. This board will finish out at 10 inches wide, 16 inches long and 2 inches thick. Once flat I sanded all sides from 120 grit up to 600 grit.

Maple-&-Paduak-end-grain-board

What looks like water is food grade mineral oil. After being in the food grade mineral oil bath for over an hour I removed it to let it air dry. I will let it dry over night before wiping it down with a cotton cloth.

Michaels-woodcraft-Maple-&-Paduak

Another view of this board that shows the finger pull, I cut one on each side to make it easier to lift. This board was finished with  food grade mineral oil, then my wood conditioner that is a food grade mineral oil and food grade beeswax mixture.

 

 

 

 

 

 

 

 

 

 

 

 

 

Custom Quilted Flame Maple Cutting Board – Part II

Flame-quilted-maple-cutting-board

This board was custom made for my blogger friend over at Forest Garden blog, she wanted the wood to look as natural as possible. She selected Flamed Quilted Maple for the board and I was lucky to find a piece with a live edge. She did not want a large cutting board but one that fit into her space that she could use everyday. She likes beautiful woods, but wanted it all organic and artistic as well as functional.

Flame-quilted-maple

The live edge board I had found was only approximate 9-1/2 inches wide. The board needed to be 12 x 15 inches. To provide the extra 2-1/2 inches or so I added a piece of Flamed Quilted Maple from another board that was a different shade that would help to off set the live edge and that would look nice.

flamed-quilted-maple-cutting-board

After cutting the two boards to match, gluing the dominos to attach the boards I glued them using Titebond III which is a water proof glue. The board stayed in the clamp press for 24 hours before I was able to run the board thru the drum sander to insure it was perfectly flat. Then I sanded this board smooth like I do all my boards to 1200 grit. After wiping down the board to remove all the fine dust using a tact cloth,  I then placed the board into a food grade mineral oil bath for about 30 minutes. Sitting in the bath of mineral oil allows the wood to soaks in the oil creating a barrier and a nice finish. I then let it drain for an hour before applying a warm mineral oil and food grade beeswax mixture. The warm mineral oil and beeswax is the final finish that adds protection. As you can see in the picture the sheen is from the warm final finish. I also shipped a tin of my Wood Conditioner!

Debbie (my wife) was in the shop last week and saw this board before it was sanded and fell in love with it. Debbie has a basket full of cutting boards but you guessed it, I am making her one just like it this week!!

I shipped the board on Monday, FedEx home Delivery, it arrived today around 11:45and shortly after being delivered I received the following email;

Dear Michael,
It board is absolutely magnificent!  My husband says that he’s not sure now what he was expecting, but that what you have created blows away whatever expectation he had.  He has informed me that it is a piece of art, and I shouldn’t use it….

At the moment it is resting in the light where we can visit it and admire it 😉  Not in the kitchen…..

I will use it and enjoy it-  he wants me to use it as a serving piece, not an every day work surface.  And truthfully, the grains and patterning in the wood you chose is just magnificent.   It is peopled with all sorts of beings- we’ve found a bear, several eyes, and other creatures so far.

I love how the wood contrasts on one side of the board, and melts almost seamlessly from the large piece of wood to the smaller one on the reverse.  You matched the grains perfectly so they look almost like they grew together.

There just aren’t enough words, Michael.  It is so absolutely smooth, and the extra sanding makes the grain appear mulch-dimensional.  It shimmers and moves with the light.

We love the live edge.  It is perfectly finished, beautifully shaded, wonderfully sculpted, and transports this piece from the everyday to the extraordinary.

Thank you so much for all of the love and care you poured into creating this wonderful cutting/serving board.  We will enjoy it so much.

…..So I think she likes it! It makes be very happy when someone orders from me and really likes my work! I hope she will tell all of her friends!  Thank you for ordering from me! 🙂

Please visit Forest Garden, she takes beautiful photographs! 

Handcrafted Ice Cream Scoops 

Also check out my engraved ice cream scoop handles!

Ice-Cream-scoop

12 inch round Cherry board that just came out of the food grade mineral oil bath! Next it will get a warm food grade mineral oil and beeswax applied for the final finish and protective coating!

cherry-cutting-board-with-decorative-edge

Custom Quilted Flame Maple Cutting Board – Part I

Flamed-Maple-Billets

A few weeks ago a blogger friend at Forest Garden blog and I were emailing about the holidays, grandchildren, the weather, etc. and she mentioned that she wanted another cutting board. She was looking for a unique cutting board, wanted a live edge, wanted a wood with character and wanted the board to be unique!

She soon picked out Quilted Flame Maple wood. I then started looking for a really nice piece that she might like. I found the two boards in the first picture, both are approximately 26 inches long and 10 inches wide. Since the board on the left had the nicer live edge, this would be the board I would use.

unfinished-maple

I sent her pictures and she loved it. We planned to keep the live edge on one side. The dimensions of her new board needed to be 12 x 14, which was an exact size for the area she planned to store it to make is easy to use everyday. Over the next week I started working on her board.

Check out Forest Garden blog!

Stay tuned for Part II coming soon!

Enjoy your evening! 🙂

 

Below are a couple Walnut Teardrop Cutting boards with handle and a Walnut Round Cutting board with handle. All of these boards just came out of the oil bath after an hour and are drying, waiting for the last finishing process! The oil makes the boards really shinny until it is dry.

Teardrop-cutting-boards-with-handle