Black Walnut and Maple End Grain Cutting Board

Black-Walnut-&-Maple-end-grain-board

Black Walnut and hard rock Maple End Grain Cutting Board

I wanted to share with you a little bit of the process of making an end grain cutting board. I am making two boards using a combination of Black Walnut and hard rock Maple. These two woods will give a nice contract of color. The final size of each board will be 14″ x 20″ x 1-1/2″ thick.

The first step is to hand pick nice hardwood, preferably woods with nice grain, color, square, no splitting and no worm holes. If you purchased wood, let the wood acclimate to the conditions of your shop for a week before starting your project. Knowing the final size of the board allows you to calculate the total board feet of hardwood required to make the board. Keep in mind that there are numerous cuts and glue ups in the process. You need to account for all of the cuts as each cut on a table saw waste 1/8 of material.

Prepare your cuts for the best use of the hardwood and the design.  If you plan to use different types of woods, you may need more board feet of one wood verses the other based on your design. Since this board is primary Black Walnut, I will need more Black Walnut than Maple.

Plan your cuts based on final size of the board. Start by cutting the wood into strips. The size of the strips is determined based on the final design and size of the board. Glue all of the strips together in the sequence of your design, leaving the boards in the clamps for a minimum of 24 hours.

Black-Walnut-and-Maple-end-grain-board

The above photo shows the Black Walnut and Maple strips, this is the first glue up. After removing the glued strips from the clamps, both surfaces were sanded smooth to size per my design.

Next step was to cross cut the above boards into strips that are 1-5/8 wide, which will make a 1-5/8 thick board. The 1-5/9 thickness provides 1/8″ for flattening both surfaces and all the sanding. After cutting the strips, each piece is carefully placed in the proper sequence based on the design. Every other piece is the opposite of the last piece.  After each piece is in order, it is time for the second glue up.

walnut-and-maple-end-grain-board

The above photo shows the second glue up of all of the strips that were cut to 1-5/8″. This will be the final design.

Black-Walnut-and-Maple-end-grain

In the above photo, after 24 hours, I removed the boards from the clamps. I then cut the board to size, 14 x 20 inch and started sanding the surface on all sides. The final thickness will be 1-1/2 inch. Once this is completed, I will cut finger pulls of each end and then sand them smooth. My sanding process starts at 120 grit up to the final grit of 300.

Black-Walut-and-Maple-end-grain-board-Michael's-Woodcraft

The sanding took nearly an hour to go from 120 grit to 300 grit. They are looking good, flat on all surfaces and all sanded. Next step is to cut the finger pulls, then apply the final finish.

Black-Walnut--&-Maple-end-grain-board

The above photo shows the board after cutting the finger pulls, sanding the finger pulls and applying the final finish.

Black-Walnut--and--Maple-end-grain-boards

Finished boards!

Black--Walnut-&-Maple-end-grain-boards

 

Black-Walnut-&-Maple-end-grain-board

I hope you enjoyed my post!

This board is stall available, made to order only. If you are interested, please email me from my Contact Us page. Click CONTACT US button below!

5-29-2020 11-11-24 AM

 

 

New Boards Made The Last Month

Michael's-Woodcraft-Walnut-rectangle-cutting-board

Above: Black Walnut Board

I thought I would post today a few of the boards that I have made this month. There were a few more that I made but did not get a picture of them!

Ambrosia-Maple-Walnut-and-Cherry-cutting-board

 

Above: Ambrosia Maple, Cherry and Black Walnut

This one is 14 inch in diameter and has a lot of different grain character and colors, it’s stunning!

Walnut-and-Maple-board-Michael's-Woodcraft

Above: Black Walnut and Maple

Customer wanted a long board to place beside her range, 22 inches long and 6-1/2 inches wide.

Black-Walnut-and-Maple-end-grain-cutting-board

Above: Black Walnut and Maple end grain cutting board

Rachel was looking for a unique board that could take lot of use. See her picture below!

Walnut-and-Maple-end-grain-cutting-board

The above photo was taken by Rachel, she is a wonderful cook, check out her Instagram page, @5280Meat

 

Walnut-rectangle-cutting-board

Above: Black Walnut board with handle.

Check out Trina’s picture below of this board, round board and ice cream scoop! Trina is a wonderful cook, check out her Instagram page, @Paleo_Newbie_Recipes

Michael's-Woodcraft-cutting-boards-ice-cream-scoops

 

My Wood Conditioner is homemade combining a mixture of food-grade mineral oil and pure food grade beeswax. It will help you maintain the finish on your boards, reviving, condition and help protect your boards from moisture and drying out.

Enjoy your afternoon!

After months of hard work and dedication, my NEW website is live!! I would love it if you would go take a look, here is the link:  MichaelsWoodcrafts

www.MichaelsWoodcrafts.com

Purchasing my work is Simple, click the above image or the SHOP NOW button below to be directed to my website.

 

 

 

 

Rustic Black Walnut Wood slices

walnut-slab-rounds

Good evening y’all!

In early January I wrote about cutting a Black Walnut log into these Walnut cookies slices. At the time the black walnut tree had just been cut down so the moisture content was 100%. After 5 weeks, most of these are at 20% moisture but there are a few at 13-15%. It will be another few weeks before the moisture is between 8-9% so that I can begin finishing them. Check out my previous post from January 7th, Walnut Wood Cookies

walnut-slab

I spent nearly 7 hours today removing the remaining bark, running them thru the planner on both sides and cleaning up the edges. They are looing really nice, a few cracks but that adds character. Most all of these are 12 inch in diameter and 2 inches thick.

walnut-round-slabs

All of them have really great color and should finish out beautifully! They will make great cutting boards, serving boards or plate chargers!

 

The National Weather Service has predicted a winter storm for our area starting Monday evening thru Tuesday with accumulations of 4 to 7 inches of freezing rain, sleet and snow! Where ever you are, I hope you are in a warm place!

Happy Valentine’s Day! I hope you enjoy your weekend! 🙂

 

I will soon be adding a new board design, see picture below!

Long-handle-walnut-serving-board

Serving boards

 

 

 

 

Custom Cutting Boards

Nice-large-cutting-board

I wanted to show you a custom board I finished and shipped this week. Sometimes when I pull out my lumber to begin making a new piece I can tell that the wood is beautiful, this time it turned out more beautiful than I initially thought. Walnut has ever rick color.

walnut-board-for-grill

The customer wanted a large board made from walnut to use in his kitchen. This is a custom size board, 20 x 30 inch and made using American Walnut. I am not sure exactly how they plan to use the board other than he mentioned that he does a lot of baking.

walnut-cutting-board

Since he lives in California, it will take 3-4 days before FedEx delivers the board,  I sure hope he likes it!

 

wood conditioner, spoon butter, board butter or wood butter in tins, made from mineral oil and beeswax, spoon butter

As a gift with every board I send a free tin of Wood Conditioner. My Wood Conditioner is homemade combining a mixture of food-grade mineral oil and pure beeswax. It will help you maintain the finish on your boards, reviving, condition and help protect your boards from moisture and drying out. To learn more, visit my Wood Conditioner page.

Enjoy your afternoon! 🙂

 

 

And The Winner Is?

July 18, 2014

two-handle-cutting-boards

Winner Winner Chicken Dinner!!! I wrote all the names on pieces of paper and shuffled them around a couple times. My wife picked out one name. The winner of my double handled cutting board is……

 Double-handle-board

Congratulationg to Suzanne!! Check out Suzanne’s web site, apuginthekitchen  🙂

Suzanne, please send me an email with your full name and street address so that I can get the cutting board shipped to you!!! 

I want to thank everyone for posting comments 🙂

 

Happy Anniversary

June 3, 2014

It’s hard to believe it’s been 1 year since I wrote my first post, unsure of where it would take me. I am a woodworker so I wanted to show my woodwork but I also enjoy cooking, grilling, hiking, camping, gardening, mountain wildlife and bird watching. So, I intended to focus on all the things I enjoy doing and my experiences.

You have allowed me to share a little of my life. We have had good times, a lot of laughs but serious moments too! You have supported me during those bad days offering kind words, suggestions and prayers.

Since my initial post, I’ve made 161 blog post, had over 25,650 hits and 2000 plus comments. The top three post based on visits and your comments are are all dessert recipes and there is a tie for the #3 spot.

#1 most visited post
Hot Fudge Sauce, Chocolate Cake and Ice Cream
#2 most visited post
Chocolate Cheesecake
#3 most visit post
Best Ever Strawberry Pie and Making Crème Brûlée

hot fudge cake and ice cream   chocolate cheesecake recipe

fresh strawberry pie   creme brulee

Blogging has been fun and the best part is, that I have met some wonderful people blogging that I probably would have never ever met. I have also learned a lot from you and have enjoyed so much reading your post and all your wonderful comments as well as seeing all of your beautiful pictures!

I want to thank everyone, to all my readers, subscribers, followers, friends and blogger friends, thank you for all of your support with a special thank you to those that comment on all my post! I am celebrating by offering you the chance to win!

Leave a comment on this post from now until the end of day on July 17th, and on July 18th I will draw the name of the lucky winner.  The prize?

two-handle-cutting-boards

One of my handcrafted double handle cutting boards or serving board,… fruit not included! Someone will win the board pictured above!! This board is made by me in my shop, by hand from local American Walnut, rock hard Maple and Northern Cherry.

Double-handle-serving-boards

What is your favorite Ben & Jerry’s ice cream?

 

Double-handle-board

Mars seedless grapes from my garden vines!

I hope everyone has a wonderful 4th of July!

 

 

 

 

 

 

Oval Cutting Board with Juice Groove

 

oval-rock-hard-maple-with-juice-groove

A couple weeks ago I was contact by email by about making a board. She was looking for a replacement oval cutting board insert for a sterling silver platter. She told me that she could find these platters on wedding gift website. The problem was if the board gets broken or you lose your board, you are out of luck, they do not offer a new replacement board.

oval-hardrock-maple-cutting-board-with-groove

She said the board was used for carving meat and it had a juice groove. It was oval, 14-1/4 inches long by 9 inches wide. The underside was beveled to fit into the silver platter. After several emails with pictures, she sent me her old board, she wanted to know if I could make 4 of them exactly like her old board. The next day her old board arrived.

oval-maple-board-with-juice-groove

Her old board was made from maple wood, the measurements were exactly what she had told me.

oval-cuttng-board-with-juice-groove

I first made a template to match her old board. Once I had the template completed, I then made her 4 new boards that were exactly like her old board, handmade from hard rock maple.

oval-cutting-board-with-juice-groove

I shipped the boards to her and she loves them and they all fit into her silver platter perfectly! 🙂 So if you have an old board that needs repair or you need a replace board exactly the same size or wood, etc. I would be glad to make it for you!

Every kitchen needs a good cutting board or serving board!

round-walnut-cutting-boards-with-handle

Handmade Cutting Boards and Serving Boards

Double handle serving board

 

 

 

 

Grilled Salmon

 

grilled-salmon-grilled-asparagus-and-sweet-white-corn

Grilled Salmon!

grilling salmon

Salmon marinated with garlic, salt, pepper, olive oil, brown sugar and soy sauce with the juice of a half lemon. The sprinkled with lemon pepper seasoning after placing on the grill!

 

grilled salmon

Almost done!

grilled-salmon-grilled-asparagus-and-sweet-white-corn

Grilled salmon served with sweet white corn and grilled asparagus.

 

If you love to cook you should always have a few nice, beautiful cutting boards. Take a minute to look at my work, I know you will find a cutting or serving board for your kitchen! 🙂

Double handle serving board

double handle cutting board

Check out the cutting board I made for Ina Garten Barefoot Contessa.

thank-you-note-Barefoot-Contessa

 

 

 

 

Jesse’s Song

Home

 

bearded iris jesse's song

This is bearded iris Jesse’s Song. It is one of my favorite tall bearded iris and is always the first bearded iris to bloom in my garden. The petals are a beautiful soft violet and neatly ruffled. The stems are strong and are nearly 36 inches tall.

 Enjoy your weekend!

or more information, view more images, pricing or to order charcuterie boards, trays, etc., click SHOP NOW

Shop Now

walnut double handle cutting board

 

 

 

New Cutting and Serving Boards

Home

snow on the mountain

Good evening y’all,

We are getting hammered with the snow from Winter Storm PAX! By the time this storm ends we are suppose to have 14 inches! It’s 2o degrees with a wind chill of 11 degrees.

While it is snowing I decided to write this post and introduce my two new cutting board designs. Click the link under the image to see more pictures!

solid Walnut cutting board

Double Handle Cutting Board or Serving Board
10-1/2″ wide X 16″ long X 3/4″ thick

unique cutting baord

walnut double handle cutting board

My new double handle cutting board is a beautiful design and it is practical for moving around food, cooking and serving food straight to the table. It is also great for your everyday kitchen chopping and slicing too. My other new cutting board is a rectangle cutting board.

rectangle cutting board

Rectangle Cutting Board
11-1/4″ wide X 15-1/2″ long X 3/4″ thick

If you need a nice cutting board, this is it!

walnut rectangle cutting board

All of my boards are handcrafted one at a time in my shop. I make both of these boards in a variety of different wood, rock hard Maple, Northern Cherry and Walnut.

What do you think about my new cutting boards?

I hope everyone is staying safe and warm. Enjoy your evening!
Michael

Recent Post

cheesecake

My Work