Black Walnut Rounds

Black--Walnut-slices-cut-May-8--2015

This afternoon a good friend and I cut 2 foot off of a Black Walnut log that is 17 inches in diameter and cut 10 Walnut rounds. Each round was cut 2-1/4 inch thick.

Cut-May-8--2015-Walnut-rounds

I will store these in my shop, stacked with wooden spacers between each piece so that air is able to pass between them. I will rotate them serveral times a month until they are dry. Drying could take a long a 6 to 10 months.

Walnut-rounds-cut-May-8-2015

The color looks great on these and as they dry they will darken.

Black-Walnut-round-cut-May-8--2015

They will make great cutting boards, serving boards, cheese boards or plate chargers! These will be available on my One of a Kind page once they are dry.  Below is a picture that shows how these can be used to serve your favorite food!

I hope you enjoy your weekend!

For more information, view more images, pricing or to order, click SHOP NOW

Shop Now

Walnut-slice-serving-baord-Michael's-Woodcraft

The above photo was taken by Bob Bernotsky at That_Paleo_Guy

 

 

Advertisement

Walnut Coasters

walnut-rounds

Back in December I post Walnut and Pentacryl, the two Walnut rounds I had cut that day from a wet Walnut log and then soaked them in a Pentacryl bath. Pentacryl is a non-toxic liquid compound of modified polymers designed to prevent racking and splitting of green wood for the drying process.  Basically a preservation solution.

The idea in using Pentacryl was to stop the cracking and splitting. After soaking for 72 hours, they have been drying naturally in my shop with cardboard on both sides. Every week or so I would check the moisture content.

walnut-rounds-drying

Just last week, the moisture content reached 9% which is what I needed before I could start preparing them for finishing. After I ran them them the drum sander to get both sides flat, I started sanding each side with 60 grit paper, then 100 grit, 120, 150, 200, 240, 280, 320, 400 and finished up with 600 grit.

After sanding I placed them into a food grade mineral oil bath. After 30 minutes I removed them from the oil bath for drying. Here is a picture of what they look like now!

walnut-coaster

The mineral oil makes them shiny but will soon soak into the wood and be a nice finish. The bark is holding on but over time could fall off or not, I am hoping it will stay.

walnut-coasters

They are looking good!

walnut-round-slabs

On February 13th, I posted Rustic Black Walnut Wood Slices, today I checked the moisture content on all of these and they are now at 11 to 14%. Still waiting on them to get to 9% moisture content so I can work these too!

 

The photo below of my boards Food Photographer Tricia Buice! Check out her website, Saving Room for Dessert.

Michaels-WoodCraft-cheese-boards

 

 

Walnut and Pentacryl

walnut-rounds

I cut a few Walnut rounds on Saturday using my chain saw from a wet log that was given to me.  I used Pentacryl, which is a non-toxic liquid compound of modified polymers designed to prevent cracking and splitting of green wood for the drying process.  Basically a preservation solution. The idea is to stop the cracking and splitting, if I get lucky there won’t be any cracks! The Pentacryl is absorbed by the wood replacing the moisture in the wood.

Using a plastic bucket, I poured the Pentacryl over the walnut rounds with a small thin piece of 1/8 wood, 1″ x 1/2″ between each piece to keep them separated. About every 12 hours I rotated the Walnut rounds, letting them soak for a total of 72 hours.

The picture above I took after removing the Walnut from the Pentacryl, you can tell they are wet, the colors seem to bleed together. All that will change when they are completed try!

I removed them from the Pentacryl, stand them on their ends and let them drain for about an hour. Next I cut cardboard rounds the size of the Walnut for both ends and covered them. The cardboard will help slow down the drying process.

walnut-rounds-drying

I will rotated these daily for the next 3-4 weeks. Once I think they are close to dry I will check the moisture content, can’t start the final finish until they are dry. I will follow up with another post when they are dry and show you the final finishing process!

Over the last year I have made a lot of new friends blogging and have so much enjoyed all the comments, conversations, emails and getting to know you! 🙂 Enjoy your Christmas with family and friends!

 

Charcuterie platter

charcuterie-platter

Artisan cutting boards